The Viscosity Control System of Fasnacht + Co guaranties you, with high accuracy, the precise measurement and regulation of viscosity, pH, temperature and level control in the ink tank.
You also can blend your solvents at every single printing unit with the blending you have adjusted and add recipe driven ink and blending.

Additional functions
· Regulation of ink-level in tank
· Measurement and regulation of the pH
· Temperature regulation with heat exchanger
· Blending of several solvents at every printing unit individually
· Measurement of solvent quantities
· Storage of job-parameters for further use
· Printout of a measurement protocol according to ISO 9000
· Network connection with PC

Components of a Viscosity Control System

Main parts (you must have)

· Measuring Unit MS4
· Electronic/Control Unit
· Rack 19", (for the quantity of 1 to 10 processor cards)· MP4, (available without display, use only with PC)
· Solenoid Valves
· Ink filter
· Small parts set, containing:
· Ball cock· Elbow · Solvent filter· Check valve

Options (strongly recommended)
· Software WinFKR
· Computer with accessories
· Cabinet for the built-in of the PC, the monitor and possibly the Rack
·
Options
· Flow sensor (sensor for viscosity and temperature)
· Cooling Device
· Housing to mount the Electronic (MP4) with display and solenoid valves
· Level control
· Tap
· The use of more than one solvent
· Multi-valve control
·
Further we supply:
· Hoses for inks and solvents ½"
· Hoses for air 6/4mm
· Electrical lines
· Cabinets (preferably RITTAL)

The system contains of a valve block and the electronic control. The ink pump - if possible a type that can be run in forward and backwards direction - supplies the printing unit and - if present - the viscosity control with ink.
The electronic control does all the necessary steps to get the system running automatically .

The advantages of the system are:

- short cleaning times 
- hardly any manual operation
- little use of solvent

CLEAN THE WEB


Description

The NSHV Web-Cleaner was especially developed to remove foreign particles off 20mm or larger without affecting the web and in a cost effective manner.

The NSHV Web-Cleaner is constructed for use on roll and formed materials or on the base of paper and foils. Each system will be individually adjusted to the requirements of the customer.

Compared to conventional systems and Hydraulic - measuring instruments, the NSHV Web-Cleaner works with a higher air volume and a greater vacuum. The special construction of the nozzle accelerates the aspirated air up to 130 m/s and higher. This hihg air speed causes the lamina film to be destroyed allowing the suspended particles to be sucked off.

Positioning of the Web-Cleaner over a an opposing roller guaranties constant distance between Web and nozzle allowing for reproducible cleaning results. The system doesn't generate any Web vibration and thus any possible impairment of the substrate.

For the complexity and completeness of the product we have realized a file ( in .pdf format) to download with all the necessary specifications.
You can download it clicking here (english version) or here (italian version).
The file is password-protected, please send an email to: paolo.capellini@mcgraph.it and we'll send you the password for free.
To visualize the .pdf format download the free software at:
http://www.adobe.com/acrobat